background image

 

24 10/100 + 2G Web/SNMP Switch

 

XP-3242

 is a high performance web-managed 

SNMP Layer 2 switch that provides users with 
switched 24 10/100Mbps Ethernet and 2 Gigabit 
ports.  It is very suitable for a company to build a 
network, not only at the beginning phase, but also 
expanding into the future. The SNMP management 
and remote control capability, plus plenty of other functions, along with its high quality, makes for 
easy and carefree use. The Gigabit module can either be copper or fiber media; it supports not only 
100M fiber modules, but also Gigabit modules, such as 10/100/1000M RJ-45 copper ports and 
Gigabit fiber SC ports with 1000BASE-SX or 1000Base-LX, Gigabit RJ-45 plus GBIC ports, these 
allow users to increase their network response time at gigabit speeds and with great flexibility.  An 
RS-232 serial port provides an easy way for installation and initial set-up.   

 
Non-blocking

 and maximum wire speed performance are designed on all switched ports, it not only 

supports Auto-Negotiation, but also AUTO-MDIX function on all switched 24 10/100M RJ-45 
ports and two Gigabit Copper ports no matter if in half or full duplex mode. These functions add to 
the convenience, ease of use, and reduce the matching effort between straight and cross-over line 
issues.  
The

 XP-3242

 provides a convenient way to operate a layer 2 management through an Internet 

browser. User friendly pull-down manual makes learning how to use the XP-3242 easy.   It’s also 
easy to control and easy to monitor. The XP-3242 supports, not only traditional SNMP functions, 
but also RMON 1,2,3,9 groups for advanced network analysis. 

Uniquely,

 it supports both port-based VLAN and Tag-based VLAN to catch-up with the new 

applications coming in the VLAN age. To increase bandwidth applications, it supports 7 groups 
with up to 4 ports Trunk; and these trunk ports are with fair-over function to provide redundant 
back-up when one or some of the ports are in malfunction.  

Total front access

 design and fully LED status display also adds to the ease of installation, 

inspection and maintenance efforts at rackmount environments. In addition an extra LED display 
reflects the fan status to help prevent over-heating issues, if the fan were to malfunction; thus 
adding to the protection of the unit and the investment. 

FEATURES 

 

Non-blocking, full-line speed, store-and-forward, Max. packet length 1568 byte 

 

Auto-Negotiation and Auto-MDIX on all 10/100/1000M copper ports 

 

24 10/100 RJ-45 ports, and 2 Gigabit port module with copper ports or fiber ports 

 

3M bit packet buffer and 1M bit control buffer  

 

Up to 14K MAC entries and 4K VLAN entries 

 

Support flow control for both half- or full-duplex operation 

 

Support Head-of-Line blocking prevention 

 

Support broadcast storm filtering 

 

Support port-based VLAN and 802.1Q tag-based VLAN  

 

Support 802.1v protocol-based VLAN classification 

 

Support 802.1x Authentication and Authorization 

 

Support IP Multicast, IGMP snooping 

 

Support 2-level priority queuing 

Reviews: