background image

Terra AC Wallbox

40A / 48A / 80A Level 2 Charger

Description

The Terra AC Wallbox is the smartest, quickest and safest Level 2 
destination charging solution for fleets, public charging operators, 
commercial facilities, workplaces, and multi-family residences. The Terra 
AC Wallbox delivers future-proof flexibility as well as advanced safety 
and protection. With connectivity and digital functionality, the Terra AC 
Wallbox is built to deliver optimized charging today and well into the 
future.

Key Benefits and Features

• Flexible, high quality design

• Universal PHEV and BEV charging

• Easy siting and installation

• Rugged NEMA Type 4 enclosure for any indoor or outdoor location

• Smart business integration
• OCPP integration with any charging network

Specifications

• Power Output @ 240Vac: 9.6kW / 11.5kW / 

19.2kW

• Max Current Output: 40A / 48A / 80A
• Cable Options: SAE J1772 Connector
• Mounting Method: Wall Mounted
• Dimensions: 15.75”(

H

) × 9.06”(W) × 4.92”(

D

)

The Terra AC Wallbox

Ordering Information

Configuration

SKU

AL2-40-240-T1-WC1R

ACWB 40A

AL2-48-240-T1-WC1R

ACWB 48A

AL2-80-240-T1-WC1R

ACWB 80A

Summary of Contents for InCharge Terra AL2-40-240-T1-WC1R








































Reviews: