Copyright © 2014 AAS Technology
N-7
www.AAS.com.tw
R201501-V06
User Manual
PoE Ethernet Extender
Over One Coax Kit
EPOC-POE-100K
This Ethernet extender consists of one EPOC-POE-100-SV Unit (host/server side) and one
EPOC-POE-100-IPC Unit (camera side). It can transfer Ethernet signal of IPC-Unit to carrier signal
though coaxial cable or network cable and extend to SV-Unit, then transfer carrier signal to
Ethernet signal and transmit power synchronously. SV-Unit could use 48~57V DC power supply
or PoE power supply, which fully meets the needs of long distance Ethernet signal transmission
and power supply. It is widely used in coaxial cable and network cable mixed wiring security
surveillance and network rebuilding projects.
Features
..
•
Uses coaxial cable or network cables to transmit Ethernet and power signals
•
Max. distance up to 500m / 1600ft via coaxial cable; 400m / 1300ft via network cable
•
Adopt advanced transmission and power supply technology
•
Ethernet delay less than 1ms; meets point-to-point application
•
Standards: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3af/at
•
Protections: Excellent circuit isolation protection, superior product anti-thunder,
anti-static and anti-interference capability
•
Appearance: Meets MIT rack installation standard
•
Plug-and-play, no setting required
•
48~57V DC power supply (Not included)
(EPOC-POE-100-SV)
Please read the Manual before attempting to use this product.
Specifications and appearance are subject to change without notice.
EPOC-POE-100-SV
Host/Server Side
N-7a
EPOC-POE-100-IPC
Camera Side
N-7b
