3M
TM
Cold Shrink QS-III
Splicing Kit 5467A-We
Instructions
IEEE Std. 404
35
kV Class
2
5
0 kV BIL
3M
™
Cold Shrink
QS-III Splicing Kit
54
6
7A-We
78-8
141-4631-8
-
A
Jacketed Concentric Neutral (JCN)
Concentric Neutral (CN)
Connector Dimensional Requirements
Minimum
Maximum
inches (mm)
inches (mm)
Outside Diameter
0.5
1
" (1
3
,
0
mm)
1.70" (43,2 mm)
Length
Aluminum (Al/Cu)
------
6.00
" (1
52
mm)
Length
Copper (Cu)
------
6.50" (165 mm)
Selection Chart
Kit Number
Cable Insulation
Conductor
O.D. Range
Size Range
54
6
7A-We
1.07" to 1.70"
1/0 AWG
-
3
50 kcmil*
(27,2 mm to 43,2 mm)
(
6
0 -
185
mm
2
)
* Splices (including size transitions) can be made to smaller or larger conductors (but larger
conductors may require special neutral handling), provided both cables are within the Insulation
O.D. Range and the connector meets the dimensional requirements shown below.
CAUTION
Working around energized high-voltage systems may cause serious
injury or death. Installation should be performed by personnel familiar
with good safety practice in handling high-voltage electrical equipment.
De-energize and ground all electrical systems before installing product.
