![background image](http://html1.mh-extra.com/html/3m/5415a-ij/5415a-ij_instructions-manual_442542001.webp)
3M
™
Cold Shrink Integrated Splice
Kit QS-III 5415A-IJ
for Jacketed Concentric Neutral (JCN) Cable
Instructions
IEEE Std. 404
15 kV Class
150 kV BIL
CAUTION
Working around energized systems may cause serious injury or death. Installation should
be performed by personnel familiar with good safety practice in handling electrical
equipment. De-energize and ground all electrical systems before installing product.
Kit Selection Table
Kit Number
Cable Insulation O.D. Range
Conductor Size Range
5415A-IJ
0.64" to 1.01"
(16,3 to 25,7 mm)
2 - 4/0 AWG*
(35–95 mm
2
)
* Splices (including size transitions) can be made to smaller or larger conductors (but larger conductors may require special neutral
handling), provided both cables are within the Insulation O.D. Range and the connector meets the dimensional requirements
shown below.
Connector Dimensional Requirements
Minimum Inches (mm)
Maximum Inches (mm)
Outside Diameter
0.40" (10,2 mm)
1.10" (28 mm)
Length
Aluminum (Al/Cu) Compression
—
4.50" (114 mm)
Length
Copper Compression and 3M
™
Shearbolt Connector
QCI 2-250
—
5.00" (127 mm)
September 2010
78-8127-8867-3-
B
3
Summary of Contents for 5415A-IJ
Page 15: ...78 8127 8867 3 B 15 ...