www.3dfunprintz.co.uk
Cord Holder
Thank you for purchasing the Cord Holder
There are some tips below to get the best out of
it.
Most importantly. The cord holder is made from
PLA as it is a natural plastic originating from corn
starch and is recyclable. For these reasons it
does not like heat.
Please don’t leave it in the sun, on a hot
windowsill, on or near a radiator or anywhere else
with a lot of heat. Please also keep away from
children and pets. PLA can be sharp when broken.
To attach to the machine
The holder needs to be mounted centrally on top of
the machine as in the photograph below
