DIP Switch setting : (ON – “1”, OFF – “0” )
1
2
3
4
LOW
0
0
0
0
1
0
0
0
1
1
0
0
1
1
1
0
HIGH
1
1
1
1
Choose the best combination of DIP switch setting for good picture
quality. Picture quality may be affected by several factors, such as wire
gauge, length of cable, camera, environment…etc.
For camera power over 8W (12VDC, 680mA) and/or covering
extended distances, local Linear P/S Adaptor for camera is required.
UC-ISO Ground Loop Isolator may be required to
eliminate electrical noise and hum if using
Switching Mode P/S Adaptor
Video output 1Vp-p 75-ohm
Power Supply 48VDC
Operating temperature -10
°
C ~ + 50
°
C
Dimensions
145mm x 80mm x 33mm
Suitable for any Camera with following specification:
Each Camera Rating : 12VDC, 680mA. Max.
Each Camera Video output : 1Vp-p 75-ohm
Specification of CI04-ASP
Color/Brightness Switch adjustment
DIP NO.
Color/Brightness
Ascending Level
Local Power for Camera
4
2Y-LINK
Advanced Universal CCTV Signal Processor
User Guide
Does not require coaxial cable
Wired with only one two-wire bell cable to transmit both video signal
& power
Simple and easy Installation
1: 4 BNC male plug 2: 8 two-wire terminal
3: DC socket 4: Power LED indicator
5: Color/Brightness Switch
User Guide
Features
Overview
4-CHANNEL SIGNAL PROCESSOR CI04-ASP
1
