ZyXEL Communications ZyXEL ZyWALL USG-1000, User Manual, Page: 714 / 986

Chapter 46 System
ZyWALL USG 2000 User’s Guide
714
The following table describes the labels in this screen.
46.6 WWW Overview
The following figure shows secure and insecure management of the ZyWALL
coming in from the WAN. HTTPS and SSH access are secure. HTTP, Telnet, and
dial-in management access are not secure.
Figure 470 Secure and Insecure Service Access From the WAN
• See Section 5.6.1 on page 100 for related information on these screens.
Note: To allow the ZyWALL to be accessed from a specified computer using a
service, make sure you do not have a service control rule or to-ZyWALL firewall
rule to block that traffic.
• See To-ZyWALL Rules on page 310 for more on To-ZyWALL firewall rules.
Table 230 System > DNS > Service Control Rule Add
LABEL DESCRIPTION
Address
Object Select ALL to allow or deny any computer to send DNS queries to the
ZyWALL.
Select a predefined address object to just allow or deny the computer
with the IP address that you specified to send DNS queries to the
ZyWALL.
Zone Select ALL to allow or prevent DNS queries through any zones.
Select a predefined zone on which a DNS query to the ZyWALL is allowed
or denied.
Action Select Accept to have the ZyWALL allow the DNS queries from the
specified computer.
Select Deny to have the ZyWALL reject the DNS queries from the
specified computer.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving