ZyXEL Communications ZyXEL ZyWALL USG-1000, User Manual

Page: 264 / 986

Chapter 14 Zones
ZyWALL USG 2000 User’s Guide
264
14.3 Zone Edit
The Zone Edit screen allows you to add or edit a zone. To access this screen, go
to the Zone screen (see
Section 14.2 on page 263 ), and click the Add icon or an
Edit icon.
Figure 161 Network > Zone > Edit
The following table describes the labels in this screen.
Table 81 Network > Zone > Edit
LABEL DESCRIPTION
Name Type the name used to refer to the zone. You may use 1-31
alphanumeric characters, underscores(
_
), or dashes (-), but the first
character cannot be a number. This value is case-sensitive.
Block Intra-
zone Traffic Select this check box to block network traffic between members in the
zone.
Member List Available lists the interfaces and VPN tunnels that do not belong to any
zone. The word in front of the name indicates whether this member is an
interface or a VPN tunnel.
INTERFACE - this member is an interface.
IPSEC - this member is a VPN tunnel.
Select the interfaces and VPN tunnels that you want to add to the zone
you are editing, and click the right arrow button to add them.
Member lists the interfaces and VPN tunnels that belong to the zone.
Select any interfaces that you want to remove from the zone, and click
the left arrow button to remove them.