manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL P1, User Manual

Share
Download
ZyXEL Communications ZyXEL ZyWALL P1 User Manual Download Page 30

ZyWALL P1 User’s Guide

Preface

29

Preface

Congratulations on your purchase of the ZyWALL. 

Note: 

Register your product online to receive e-mail notices of firmware upgrades and 

information at www.zyxel.com for global products, or at www.us.zyxel.com for 
North American products.

Your ZyWALL is easy to install and configure. 

About This User's Guide

This manual is designed to guide you through the configuration of your ZyWALL for its 
various applications.

Note: 

Use the web configurator or command interpreter interface (CLI) to configure 
your ZyWALL. Not all features can be configured through all interfaces.

Related Documentation

• Supporting Disk

Refer to the included CD for support documents.

• Quick Start Guide 

The Quick Start Guide is designed to help you get up and running right away. It contains 
a detailed easy-to-follow connection diagram, default settings, handy checklists and 
information on setting up your network and configuring for Internet access.

• Web Configurator Online Help

Embedded web help for descriptions of individual screens and supplementary 
information.

• ZyXEL Glossary and Web Site

Please refer to www.zyxel.com for an online glossary of networking terms and additional 
support documentation.

User Guide Feedback 

Help us help you. E-mail all User Guide-related comments, questions or suggestions for 
improvement to [email protected] or send regular mail to The Technical Writing 
Team, ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, 
Hsinchu, 300, Taiwan. Thank you!

Syntax Conventions

• “Enter” means for you to type one or more characters. “Select” or “Choose” means for 

you to use one predefined choices.

Summary of Contents for ZyXEL ZyWALL P1


















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands