manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL 5, User Manual

Share
Download
ZyXEL Communications ZyXEL ZyWALL 5 User Manual Download Page 283

ZyWALL 5 User’s Guide

Chapter 17 Network Address Translation (NAT)

281

C

H A P T E R

 17

Network Address Translation 

(NAT) 

This chapter discusses how to configure NAT on the ZyWALL.

17.1  NAT Overview

NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a 
host in a packet. For example, the source address of an outgoing packet, used within one 
network is changed to a different IP address known within another network. 

17.1.1  NAT Definitions

Inside/outside denotes where a host is located relative to the ZyWALL. For example, the 
computers of your subscribers are the inside hosts, while the web servers on the Internet are 
the outside hosts. 

Global/local denotes the IP address of a host in a packet as the packet traverses a router. For 
example, the local address refers to the IP address of a host when the packet is in the local 
network, while the global address refers to the IP address of the host when the same packet is 
traveling in the WAN side. 

Note that inside/outside refers to the location of a host, while global/local refers to the IP 
address of a host used in a packet. Thus, an inside local address (ILA) is the IP address of an 
inside host in a packet when the packet is still in the local network, while an inside global 
address (IGA) is the IP address of the same inside host when the packet is on the WAN side. 
The following table summarizes this information.

Note: 

NAT never changes the IP address (either local or global) of an 

outside

 host.

Table 91   

NAT Definitions

TERM

DESCRIPTION

Inside

This refers to the host on the LAN.

Outside

This refers to the host on the WAN.

Local

This refers to the packet address (source or destination) as the packet travels on the LAN.

Global

This refers to the packet address (source or destination) as the packet travels on the 

WAN.

Summary of Contents for ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands