ZyXEL Communications ZyXEL Dimension ES-2724, User Manual, Page: 92 / 341

ES-2724 User’s Guide
90 Chapter 8 VLAN
Figure 37 Protocol Based VLAN
The following table describes the labels in this screen.
Table 18 Protocol Based VLAN Setup
LABEL DESCRIPTION
Active Check this box to activate this protocol based VLAN.
Port Type a port to be included in this protocol based VLAN.
This port must belong to a static VLAN in order to participate in a protocol based
VLAN. See Chapter 8 on page 81 for more details on setting up VLANs.
Name Enter up to 32 alphanumeric characters to identify this protocol based VLAN.
Ethernet-type Use the drop down list box to select a predefined protocol to be included in this
protocol based VLAN or select Others and type the protocol number in hexadecimal
notation. For example the IP protocol in hexadecimal notation is 0800, and Novell IPX
protocol is 8137.
Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff
are not allowed to be used for protocol based VLANs.
VID Enter the ID of a VLAN to which the port belongs. This must be an existing VLAN
which you defined in the Advanced Applications , VLAN screens.
Priority Select the priority level that the switch will assign to frames belonging to this VLAN.
Add Click Add to save your changes to the switch’s run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to reset the fields.
Index This is the index number identifying this protocol based VLAN. Click on any of these
numbers to edit an existing protocol based VLAN.
Active This field shows whether the protocol based VLAN is active or not.
Port This field shows which port belongs to this protocol based VLAN.
Name This field shows the name the protocol based VLAN.
Ethernet Type This field shows which Ethernet protocol is part of this protocol based VLAN.