ZyXEL Communications ZyXEL Dimension ES-2724, User Manual, Page: 295 / 341

ES-2724 User’s Guide
Chapter 42 Interface Commands 293
• Enable ingress checking on the interface.
42.2.8 frame-type
Syntax:
frame-type <all|tagged>
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Enable ingress checking on the ports.
• Enable tagged frame-types on the interface.
42.2.9 weight
Syntax:
weight <wt1> <wt2> ... <wt8>
where
An example is shown next.
• Enable WFQ queuing on the switch.
• Enable port 2 and ports 6 to 8 for configuration.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# ingress-check
<all|tagged|u
ntagged>
= Choose to accept both tagged and untagged incoming frames or just
tagged incoming frames on a port.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# ingress-check
sysname(config-interface)# frame-type tagged
<wt1> <wt2> ...
<wt8>
= Sets the interface WFQ weighting. A weight value of one to eight is
given to each variable from
wt 1
to
wt 8
.