ZyXEL Communications ZyWall USG20-VPN User Manual Download Page 608

Page: 608 / 683

Chapter 32 File Manager

USG20(W)-VPN Series User’s Guide

608

Configuration File Flow at Restart

• If there is not a

startup-config.conf

when you restart the USG (whether through a

management interface or by physically turning the power off and back on), the USG uses the

system-default.conf

configuration file with the USG’s default settings.

• If there is a

startup-config.conf

, the USG checks it for errors and applies it. If there are no

errors, the USG uses it and copies it to the

lastgood.conf

configuration file as a back up file. If

there is an error, the USG generates a log and copies the

startup-config.conf

configuration file

to the

startup-config-bad.conf

configuration file and tries the existing

lastgood.conf

configuration file. If there isn’t a

lastgood.conf

configuration file or it also has an error, the USG

applies the

system-default.conf

configuration file.

• You can change the way the

startup-config.conf

file is applied. Include the

setenv-startup

stop-on-error off

command. The USG ignores any errors in the

startup-config.conf

file and

applies all of the valid commands. The USG still generates a log for any errors.

Figure 426

Maintenance > File Manager > Configuration File

Do not turn off the USG while configuration file upload is in progress.

Summary of Contents for ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyWall USG20-VPN

Reviews:

Brands by name

Popular brands

ZyXEL Communications ZyWall USG20-VPN, User Manual

Search results

Summary of Contents for ZyWall USG20-VPN

Reviews:

Brands by name

Popular brands