manualshive.com logo in svg

ZyXEL Communications ZyWall USG20-VPN, User Manual

Share
Download
ZyXEL Communications ZyWall USG20-VPN User Manual Download Page 549

 Chapter 30 System

USG20(W)-VPN Series User’s Guide

549

The USG allows you to configure address records about the USG itself or another device. This way 
you can keep a record of DNS names and addresses that people on your network may use 
frequently. If the USG receives a DNS query for an FQDN for which the USG has an address record, 
the USG can send the IP address in a DNS response without having to query a DNS name server.

30.6.4  PTR Record

A PTR (pointer) record is also called a reverse record or a reverse lookup record. It is a mapping of 
an IP address to a domain name.

30.6.5  Adding an Address/PTR Record 

Click the 

Add

 icon in the 

Address/PTR Record

 table to add an address/PTR record.

Figure 373   

Configuration > System > DNS > Address/PTR Record Edit

The following table describes the labels in this screen.  

30.6.6  CNAME Record

A Canonical Name Record or CNAME record is a type of resource record in the Domain Name 
System (DNS) that specifies that the domain name is an alias of another, canonical domain name. 
This allows users to set up a record for a domain name which translates to an IP address, in other 
words, the domain name is an alias of another. This record also binds all the subdomains to the 
same IP address without having to create a record for each, so when the IP address is changed, all 
subdomain’s IP address is updated as well, with one edit to the record.  

Table 235   

Configuration > System > DNS > Address/PTR Record Edit

LABEL

DESCRIPTION

FQDN

Type a Fully-Qualified Domain Name (FQDN) of a server. An FQDN starts with a host 
name and continues all the way up to the top-level domain name. For example, 
www.zyxel.com.tw is a fully qualified domain name, where “www” is the host, “zyxel” is 
the third-level domain, “com” is the second-level domain, and “tw” is the top level 
domain. Underscores are not allowed.

Use "*." as a prefix in the FQDN for a wildcard domain name (for example, 
*.example.com).

IP Address

Enter the IP address of the host in dotted decimal notation.

OK

Click 

OK

 to save your customized settings and exit this screen. 

Cancel

Click 

Cancel

 to exit this screen without saving

Summary of Contents for ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands