Chapter 30 System
USG20(W)-VPN Series User’s Guide
540
Figure 368
Configuration > System > USB Storage
The following table describes the labels in this screen.
30.4 Date and Time
For effective scheduling and logging, the USG system time must be accurate. The USG’s Real Time
Chip (RTC) keeps track of the time and date. There is also a software mechanism to set the time
manually or get the current time and date from an external server.
To change your USG’s time based on your local time zone and date, click
Configuration > System
> Date/Time
. The screen displays as shown. You can manually set the USG’s time and date or
have the USG get the date and time from a time server.
Table 230
Configuration > System > USB Storage
LABEL
DESCRIPTION
Activate USB
storage service
Select this if you want to use the connected USB device(s).
Disk full warning
when remaining
space is less
than
Set a number and select a unit (
MB
or
%
) to have the USG send a warning message when
the remaining USB storage space is less than the value you set here.
Apply
Click
Apply
to save your changes back to the USG.
Reset
Click
Reset
to return the screen to its last-saved settings.
Summary of Contents for ZyWall USG20-VPN
Page 17: ...17 PART I User s Guide ...
Page 18: ...18 ...
Page 99: ...99 PART II Technical Reference ...
Page 100: ...100 ...
