ZyXEL Communications ZyWall USG20-VPN User Manual Download

Page: 23 / 683

Chapter 1 Introduction

USG20(W)-VPN Series User’s Guide

Cloud CNM

Use the

CloudCNM

screen (see

Section 30.13 on page 583

) to enable and configure management

of the USG by a Central Network Management system.

1.3 Web Configurator

In order to use the Web Configurator, you must:

• Use one of the following web browser versions or later: Internet Explorer 7, Firefox 3.5, Chrome

9.0

• Allow pop-up windows (blocked by default in Windows XP Service Pack 2)
• Enable JavaScripts, Java permissions, and cookies

The recommended screen resolution is 1024 x 768 pixels.

1.3.1 Web Configurator Access

Make sure your USG hardware is properly connected. See the Quick Start Guide.

In your browser go to

http://192.168.1.1

. By default, the USG automatically routes this request to

its HTTPS server, and it is recommended to keep this setting. The

Login

screen appears.

Type the user name (default: “admin”) and password (default: “1234”).

If you have a OTP (One-Time Password) token generate a number and enter it in the

One-Time

Password

field. The number is only good for one login. You must use the token to generate a new

number the next time you log in.

Click

Login

. If you logged in using the default user name and password, the

Update Admin Info

screen appears. Otherwise, the dashboard appears.

Summary of Contents for ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyWall USG20-VPN

Reviews:

Related manuals for ZyWall USG20-VPN

Brands by name

Popular brands

ZyXEL Communications ZyWall USG20-VPN, User Manual

Search results

Summary of Contents for ZyWall USG20-VPN

Reviews:

Related manuals for ZyWall USG20-VPN

Brands by name

Popular brands