ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 307

Page: 307 / 426

ZyWALL / USG (ZLD) CLI Reference Guide

307

H A P T E R

4 8

ISP Accounts

Use ISP accounts to manage Internet Service Provider (ISP) account information for PPPoE, PPTP
and cellular interfaces.

48.1 ISP Accounts Overview

An ISP account is a profile of settings for Internet access using PPPoE, PPTP, or cellular.

48.1.1 PPPoE and PPTP Account Commands

The following table lists the PPPoE and PPTP ISP account commands.

Table 185

PPPoE and PPTP ISP Account Commands

COMMAND

DESCRIPTION

show account [pppoe

profile_name

pptp

profile_name

]

Displays information about the specified account(s).

[no] account {pppoe | pptp}

profile_name

Creates a new ISP account with name

profile_name

if necessary and enters

sub-command mode. The

command deletes the specified ISP account.

profile_name

: use 1-31 alphanumeric characters, underscores(

), or

dashes (-), but the first character cannot be a number. This value is case-
sensitive.

encrypted-password

ciphertext

Sets a encrypted secret for the specified account.

ciphertext

[no] user

username

Sets the username for the specified ISP account. The

command clears

the username.

username

: You can use alphanumeric, underscores (_), dashes (-), commas

(,), and

/@$

characters, and it can be up to 64 characters long.

[no] password

password

Sets the password for the specified ISP account. The

command clears

the password.

password

: You can use up to 63 printable ASCII characters. Spaces are not

allowed.

[no] authentication {chap-pap |

chap | pap | mschap | mschap-v2}

Sets the authentication for the specified ISP account. The

command sets

the authentication to chap-pap.

[no] compression {yes | no}

Turns compression on or off for the specified ISP account. The

command

turns off compression.

[no] idle <0..360>

Sets the idle timeout for the specified ISP account. The

command sets

the idle timeout to zero.

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL USG Series, Reference Manual

Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands