ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 272

Page: 272 / 426

Chapter 39 User/Group

ZyWALL / USG (ZLD) CLI Reference Guide

272

39.2.3.1 User Setting Command Examples

The following commands show the current settings for the number of simultaneous logins.

users default-setting [no] user-type <admin

user> logon-re-auth-time <0..1440>

Sets the default reauthorization time (in minutes) for each type of
new user. Set it to zero for unlimited reauthorization time. The

command sets the default reauthorization time to thirty.

show users retry-settings

Displays the current retry limit settings for users.

[no] users retry-limit

Enables the retry limit for users. The

command disables the

retry limit.

[no] users retry-count <1..99>

Sets the number of failed login attempts a user can have before the
account or IP address is locked out for lockout-period minutes. The

command sets the retry-count to five.

[no] users lockout-period <1..65535>

Sets the amount of time, in minutes, a user or IP address is locked
out after retry-count number of failed login attempts. The

command sets the lockout period to thirty minutes.

show users simultaneous-logon-settings

Displays the current settings for simultaneous logins by users.

[no] users simultaneous-logon {administration

| access} enforce

Enables the limit on the number of simultaneous logins by users of
the specified account-type. The

command disables the limit, or

allows an unlimited number of simultaneous logins.

[no] users simultaneous-logon {administration

| access} limit <1..1024>

Sets the limit for the number of simultaneous logins by users of the
specified account-type. The

command sets the limit to one.

show users update-lease-settings

Displays whether or not access users can automatically renew their
lease time.

[no] users update-lease automation

Lets users automatically renew their lease time. The

command

prevents them from automatically renewing it.

show users idle-detection-settings

Displays whether or not users are automatically logged out, and, if
so, how many minutes of idle time must pass before they are
logged out.

[no] users idle-detection

Enables logging users out after a specified number of minutes of
idle time. The

command disables logging them out.

[no] users idle-detection timeout <1..60>

Sets the number of minutes of idle time before users are
automatically logged out. The

command sets the idle-detection

timeout to three minutes.

Table 160

username/groupname Commands Summary: Settings (continued)

COMMAND

DESCRIPTION

Router# configure terminal

Router(config)# show users simultaneous-logon-settings

enable simultaneous logon limitation for administration account: yes

maximum simultaneous logon per administration account : 1

enable simultaneous logon limitation for access account : yes

maximum simultaneous logon per access account : 3

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL USG Series, Reference Manual

Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands