ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 138

Page: 138 / 426

Chapter 18 DDNS

ZyWALL / USG (ZLD) CLI Reference Guide

138

18.2 DDNS Commands Summary

The following table describes the values required for many DDNS commands. Other values are
discussed with the corresponding commands.

The following table lists the DDNS commands.

Table 73

Input Values for DDNS Commands

LABEL

DESCRIPTION

profile_name

The name of the DDNS profile. You may use 1-31 alphanumeric characters,
underscores(

), or dashes (-), but the first character cannot be a number. This value is

case-sensitive.

Table 74

ip ddns Commands

COMMAND

DESCRIPTION

show ddns [

profile_name

]

Displays information about the specified DDNS profile or
about all DDNS profiles.

show ddns-status

Shows which DDNS profiles are active, inactive or have failed.

[no] ip ddns profile

profile_name

Creates or edits the specified DDNS profile and enters sub-
command mode if necessary. The

command deletes this

profile.

[no]https activate

Encrypts traffic using SSL (port 443) to the DDNS server. Not
all DDNS providers support this option. The

command

disables HTTPS.

[no] service-type {dyndns | dyndns_static |

dyndns_custom | dynu-basic | dynu-premium |

no-ip | peanut-hull | 3322-dyn | 3322-static |

Selfhost | User custom}

Sets the service type in the specified DDNS profile. The

command clears it.

[no] username

username

password

password

Sets the username and password in the specified DDNS
profile. The

command clears these fields.

username

: You can use up to 31 alphanumeric characters and

the underscore (_).

password

: You can use up to 64 alphanumeric characters and

the underscore (_).

[no] host

hostname

Sets the domain name in the specified DDNS profile. The

command clears the domain name.

hostname

: You may up to 254 alphanumeric characters,

dashes (-), or periods (.), but the first character must be
alphanumeric.

[no] ip-select {iface | auto | custom}

Sets the IP address update policy in the specified DDNS
profile. The

command clears the policy.

[no] ip-select-backup {iface | auto | custom}

Sets the alternate IP address update policy in the specified
DDNS profile. The

command clears the policy.

[no] custom

Sets the static IP address in the specified DDNS profile. The

command clears it.

[no] backup-custom

Sets the static IP address for the backup interface in the
specified DDNS profile. The

command clears it.

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL USG Series, Reference Manual

Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands