ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 130 | Manualshive

Page: 130 / 426

background image

Chapter 16 Routing Protocol

ZyWALL / USG (ZLD) CLI Reference Guide

130

16.2.1 RIP Commands

This table lists the commands for RIP.

16.2.2 General OSPF Commands

This table lists the commands for general OSPF configuration.

Table 65

router Commands: RIP

COMMAND

DESCRIPTION

router rip

Enters sub-command mode.

[no] network

interface_name

Enables RIP on the specified Ethernet interface. The

no

command disables RIP on the specified interface.

[no] redistribute {static | ospf}

Enables redistribution of routing information learned from
the specified source. The

no

command disables

redistribution from the specified source.

redistribute {static | ospf} metric <0..16>

Sets the metric when redistributing routing information
learned from the specified source.

[no] version <1..2>

Sets the default RIP version for all interfaces with RIP
enabled. If the interface RIP version is blank, the interface
uses the default version. This is not available in the GUI.
The

no

command sets the default RIP version to 2.

[no] passive-interface

interface_name

Sets the direction to “In-Only” for the specified interface.
The

no

command sets the direction to bi-directional.

[no] authentication mode {md5 | text}

Sets the authentication mode for RIP. The

no

command

sets the authentication mode to “none”.

[no] authentication string

authkey

Sets the password for text authentication. The

no

command clears the password.

authentication key <1..255> key-string

authkey

Sets the MD5 ID and password for MD5 authentication.

no authentication key

Clears the MD5 ID and password.

[no] outonly-interface

interface_name

Sets the direction to “Out-Only” for the specified interface.
The

no

command sets the direction to “BiDir”.

encrypted-string ciphertext

Sets the cipher to encrypt the string.

Table 66

router Commands: General OSPF Configuration

COMMAND

DESCRIPTION

router ospf

Enters sub-command mode.

[no] redistribute {static | rip}

Enables redistribution of routing information learned from the
specified non-OSPF source. The

no

command disables redistribution

from the specified non-OSPF source.

[no] redistribute {static | rip} metric-

type <1..2> metric <0..16777214>

Sets the metric for routing information learned from the specified
non-OSPF source. The

no

command clears the metric.

[no] passive-interface

interface_name

Sets the direction to “In-Only” for the specified interface. The

no

command sets the direction to “BiDir”.

[no] router-id IP

Sets the 32-bit ID (in IP address format) of the ZyWALL / USG. The

no

command resets it to “default”, or the highest available IP

address.

«
...
128
129
130
131
132
...
»

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZyWALL USG Series

Brand: Keezel Pages: 30

Brand: Watchguard Pages: 22

ZyWALL 35 Series

Brand: ZyXEL Communications Pages: 872

Brand: PYCH Pages: 17

SecPath F1000-AI-5 Series

Brand: H3C Pages: 70

Brand: Barracuda Pages: 7

NG FIREWALL 5.0.3

Brand: Barracuda Networks Pages: 24

DIR-330 - Wireless G VPN Router

Brand: D-Link Pages: 3

Brand: H3C Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands