ZyXEL Communications ZyWALL 70, User Manual

Page: 333 / 705

ZyWALL 70 User’s Guide
Chapter 20 Bandwidth Management 333
Figure 156 Bandwidth Management: Class Setup
The following table describes the labels in this screen.
Table 115 Bandwidth Management: Class Setup
LABEL DESCRIPTION
Interface Select an interface from the drop-down list box for which you wish to set up classes.
Bandwidth
Management
This field displays whether bandwidth management on the interface you selected in
the field above is enabled ( Active ) or not ( Inactive ).
Add Sub-Class Click Add Sub-class to add a sub-class.
Edit Click Edit to configure the selected class. You cannot edit the root class.
Delete Click Delete to delete the class and all its sub-classes. You cannot delete the root
class.
Statistics Click Statistics to display the status of the selected class.
Filter List This list displays the bandwidth management filters that are configured for the
classes on the selected interface. The ZyWALL applies the bandwidth management
filters in the order that they appear here. Once a connection matches a bandwidth
management filter, the ZyWALL applies the rules of the corresponding bandwidth
management class and does not check the connection against any other bandwidth
management filters.
# This is the index number of an individual bandwidth management filter.
Filter Name This is the name that identifies a bandwidth management filter.
Service This is the service that this bandwidth management filter is configured to manage.