manualshive.com logo in svg

ZyXEL Communications ZYWALL 2 WG, User Manual

Share
Download
ZyXEL Communications ZYWALL 2 WG User Manual Download Page 440

Chapter 22 Remote Management

ZyWALL 2WG User’s Guide

440

3

Telnet

4

HTTPS and HTTP

22.1.1  Remote Management Limitations

Remote management does not work when:

1

You have not enabled that service on the interface in the corresponding remote 
management screen.

2

You have disabled that service in one of the remote management screens.

3

The IP address in the 

Secure Client IP

 

Address

 field does not match the client IP 

address. If it does not match, the ZyWALL will disconnect the session immediately.

4

There is already another remote management session with an equal or higher priority 
running. You may only have one remote management session running at one time.

5

There is a firewall rule that blocks it.

6

A filter is applied (through the SMT or the commands) to block a Telnet, FTP or Web 
service.

22.1.2  System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds). 
The ZyWALL automatically logs you out if the management session remains idle for longer 
than this timeout period. The management session does not time out when a statistics screen is 
polling. You can change the timeout period in the

 MAINTENANCE

 > 

General 

screen.

22.2  WWW (HTTP and HTTPS) 

HTTPS (HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL) is a web 
protocol that encrypts and decrypts web pages. Secure Socket Layer (SSL) is an application-
level protocol that enables secure transactions of data by ensuring confidentiality (an 
unauthorized party cannot read the transferred data), authentication (one party can identify the 
other party) and data integrity (you know if data has been changed). 
It relies upon certificates, public keys, and private keys (see 

Chapter 15 on page 349

 

for more 

information).
HTTPS on the ZyWALL is used so that you may securely access the ZyWALL using the web 
configurator. The SSL protocol specifies that the SSL server (the ZyWALL) must always 
authenticate itself to the SSL client (the computer which requests the HTTPS connection with 
the ZyWALL), whereas the SSL client only should authenticate itself when the SSL server 
requires it to do so (select

 Authenticate Client Certificates 

in the 

REMOTE MGMT > 

WWW 

screen). 

Authenticate Client Certificates

 is optional and if selected means the SSL-

client must send the ZyWALL a certificate. You must apply for a certificate for the browser 
from a CA that is a trusted CA on the ZyWALL.
Please refer to the following figure. 

1

HTTPS connection requests from an SSL-aware web browser go to port 443 (by default) 
on the ZyWALL’s WS (web server).

Summary of Contents for ZYWALL 2 WG

















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands