manualshive.com logo in svg

ZyXEL Communications ZYWALL 2 WG, User Manual

Share
Download
ZyXEL Communications ZYWALL 2 WG User Manual Download Page 161

 Chapter 7 Bridge Screens

ZyWALL 2WG User’s Guide

161

Once a stable network topology has been established, all bridges listen for Hello BPDUs 
(Bridge Protocol Data Units) transmitted from the root bridge. If a bridge does not get a Hello 
BPDU after a predefined interval (Max Age), the bridge assumes that the link to the root 
bridge is down. This bridge then initiates negotiations with other bridges to reconfigure the 
network to re-establish a valid network topology.

7.2.4  STP Port States

STP assigns five port states (see next table) to eliminate packet looping. A bridge port is not 
allowed to go directly from blocking state to forwarding state so as to eliminate transient 
loops.

7.3  Bridge

Select 

Bridge

 and click 

Apply

 in the 

MAINTENANCE Device Mode

 screen to have the 

ZyWALL function as a bridge. 
In bridge mode, the ZyWALL functions as a transparent firewall (also known as a bridge 
firewall). The ZyWALL bridges traffic traveling between the ZyWALL's interfaces and still  
filters and inspects packets. You do not need to change the configuration of your existing 
network.  
You can use the firewall and VPN in bridge mode. See the user’s guide for a list of other 
features that are available in bridge mode.
Click 

NETWORK

 > 

BRIDGE

 to display the screen shown next. Use this screen to configure 

bridge and RSTP (Rapid Spanning Tree Protocol) settings. 

Table 28   

STP Port States

PORT STATE

DESCRIPTION

Disabled

STP is disabled (default).

Blocking

Only configuration and management BPDUs are received and processed.

Listening

All BPDUs are received and processed.

Learning

All BPDUs are received and processed. Information frames are submitted to the 

learning process but not forwarded.

Forwarding

All BPDUs are received and processed. All information frames are received and 

forwarded.

Summary of Contents for ZYWALL 2 WG

















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands