manualshive.com logo in svg

ZyXEL Communications ZYWALL 2 WG, User Manual

Share
Download
ZyXEL Communications ZYWALL 2 WG User Manual Download Page 142

Chapter 5 Registration

ZyWALL 2WG User’s Guide

142

5.2  Registration

To register your ZyWALL with myZyXEL.com and activate the content filtering service, 
click 

REGISTRATION

 in the navigation panel to open the screen as shown next.

Figure 90   

REGISTRATION

The following table describes the labels in this screen. 

Table 21   

REGISTRATION

LABEL

DESCRIPTION

Device Registration

If you select 

Existing myZyXEL.com account

, only the 

User Name

 and 

Password

 fields are available.

New myZyXEL.com 

account

If you haven’t created an account at myZyXEL.com, select this option and 

configure the following fields to create an account and register your 

ZyWALL.

Existing myZyXEL.com 

account

If you already have an account at myZyXEL.com, select this option and enter 

your user name and password in the fields below to register your ZyWALL.

User Name

Enter a user name for your myZyXEL.com account. The name should be 

from six to 20 alphanumeric characters (and the underscore). Spaces are 

not allowed.

Check

Click this button to check with the myZyXEL.com database to verify the user 

name you entered has not been used.

Password

Enter a password of between six and 20 alphanumeric characters (and the 

underscore). Spaces are not allowed.

Confirm Password

Enter the password again for confirmation.

E-Mail Address

Enter your e-mail address. You can use up to 80 alphanumeric characters 

(periods and the underscore are also allowed) without spaces.

Country

Select your country from the drop-down box list.

Service Activation

You can try trial service subscription. After the trial expires, you can buy an 

iCard and enter the license key in the 

REGISTRATION Service 

screen to 

extend the service.

Content Filtering 1-

month Trial

Select the check box to activate a trial. The trial period starts the day you 

activate the trial.

Summary of Contents for ZYWALL 2 WG

















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands