ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 501 / 562

Chapter 39 File Manager
ZyWALL 110/310/1100 Series User’s Guide
501
Line 3 in the following example exits sub command mode.
Lines 1 and 3 in the following example are comments and line 4 exits sub command mode.
Lines 1 and 2 are comments. Line 5 exits sub command mode.
Errors in Configuration Files or Shell Scripts
When you apply a configuration file or run a shell script, the ZyWALL processes the file line-by-line.
The ZyWALL checks the first line and applies the line if no errors are detected. Then it continues
with the next line. If the ZyWALL finds an error, it stops applying the configuration file or shell script
and generates a log.
You can change the way a configuration file or shell script is applied. Include
setenv stop-on-
error off
in the configuration file or shell script. The ZyWALL ignores any errors in the
configuration file or shell script and applies all of the valid commands. The ZyWALL still generates a
log for any errors.
39.2 The Configuration File Screen
Click Maintenance > File Manager > Configuration File to open the Configuration File
screen. Use the Configuration File screen to store, run, and name configuration files. You can also
download configuration files from the ZyWALL to your computer and upload configuration files from
your computer to the ZyWALL.
Once your ZyWALL is configured and functioning properly, it is highly recommended that you back
up your configuration file before making further configuration changes. The backup configuration
file will be useful in case you need to return to your previous settings.
interface ge1
ip address dhcp
!
!
interface ge1
# this interface is a DHCP client
!
! this is from Joe
# on 2008/04/05
interface ge1
ip address dhcp
!