ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 49 / 562

Share

Page: 49 / 562

ZyXEL Communications ZyWALL 110 Series User Manual Download Page 49

Chapter 4 Quick Setup Wizards

ZyWALL 110/310/1100 Series User’s Guide

49

• VPN Setup configures a VPN tunnel for a secure connection to another computer or network.
• VPN Settings for Configuration Provisioning sets up a VPN rule the ZyWALL IPSec VPN Client

can retrieve. Just enter a user name, password and the IP address of the ZyWALL in the ZyWALL
IPSec VPN Client to get the VPN settings automatically from the ZyWALL.

Figure 30

VPN Wizard Welcome

4.3.2 VPN Setup Wizard: Wizard Type

Choose Express to create a VPN rule with the default phase 1 and phase 2 settings to connect to
another ZLD-based ZyWALL using a pre-shared key.

Choose Advanced to change the default settings and/or use certificates instead of a pre-shared
key to create a VPN rule to connect to another IPSec device.

Figure 31

VPN Setup Wizard: Wizard Type

«
...
47
48
49
50
51
...
»

Summary of Contents for ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Reviews:

No comments