ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 47 / 562

Chapter 4 Quick Setup Wizards
ZyWALL 110/310/1100 Series User’s Guide
47
4.2.5 Quick Setup Interface Wizard: Summary
This screen displays the WAN interface’s settings.
Figure 28
Interface Wizard: Summary WAN (PPTP Shown)
Server IP Type the IP address of the PPTP server.
Connection ID Enter the connection ID or connection name in this field. It must follow the "c:id" and
"n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your DSL modem.
You can use alphanumeric and -_
:
characters, and it can be up to 31 characters long.
WAN Interface
Setup
WAN Interface This displays the identity of the interface you configure to connect with your ISP.
Zone This field displays to which security zone this interface and Internet connection will
belong.
IP Address This field is read-only when the WAN interface uses a dynamic IP address. If your WAN
interface uses a static IP address, enter it in this field.
First DNS
Server
Second DNS
Server
These fields only display for an interface with a static IP address. Enter the DNS server
IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a machine in order to access
it.
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. The DNS server is extremely important because without it, you
must know the IP address of a computer before you can access it. The ZyWALL uses a
system DNS server (in the order you specify here) to resolve domain names for VPN,
DDNS and the time server.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Table 12
WAN and ISP Connection Settings (continued)
LABEL DESCRIPTION