manualshive.com logo in svg

ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 450 / 562

Share
Download
ZyXEL Communications ZyWALL 110 Series User Manual Download Page 450

Chapter 37 System

ZyWALL 110/310/1100 Series User’s Guide

450

37.6  DNS Overview

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and 
vice versa. The DNS server is extremely important because without it, you must know the IP 
address of a machine before you can access it. 

37.6.1  DNS Server Address Assignment

The ZyWALL can get the DNS server addresses in the following ways.

• The ISP tells you the DNS server addresses, usually in the form of an information sheet, when 

you sign up. If your ISP gives you DNS server addresses, manually enter them in the DNS server 
fields.

• If your ISP dynamically assigns the DNS server IP addresses (along with the ZyWALL’s WAN IP 

address), set the DNS server fields to get the DNS server address from the ISP. 

• You can manually enter the IP addresses of other DNS servers.

37.6.2  Configuring the DNS Screen

Click Configuration > System > DNS to change your ZyWALL’s DNS settings. Use the DNS 
screen to configure the ZyWALL to use a DNS server to resolve domain names for ZyWALL system 
features like VPN, DDNS and the time server. You can also configure the ZyWALL to accept or 
discard DNS queries. Use the Network > Interface screens to configure the DNS server 
information that the ZyWALL sends to the specified DHCP client devices.

Figure 298   

Configuration > System > DNS

Summary of Contents for ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Reviews:

No comments