manualshive.com logo in svg

ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 41 / 562

Share
Download
ZyXEL Communications ZyWALL 110 Series User Manual Download Page 41

 Chapter 3 Hardware Introduction

ZyWALL 110/310/1100 Series User’s Guide

41

3.5.1  Rear Panels

The following graphic shows the rear panel of the ZyWALL.  

Table 11   

Rear Panel

LABEL

DESCRIPTION

Console

You can use the console port to manage the ZyWALL using CLI commands. You will be 
prompted to enter your user name and password. See the Command Reference Guide for 
more information about the CLI. 

When configuring using the console port, you need a computer equipped with 
communications software configured to the following parameters:

•

Speed 115200 bps

•

Data  Bits  8

•

Parity None

•

Stop  Bit  1

•

Flow Control Off

CF Card Slot

Insert a compact flash card into this slot to store ZyWALL system logs.

Power

Use the included power cord to connect the power socket to a power outlet. Turn the power 
switch on if your ZyWALL has a power switch.

Lock

Attach a lock-and-cable from the Kensington lock (the small, metal-reinforced, oval hole) 
to a permanent object, such as a pole, to secure the ZyWALL in place. 

Fan

The fans are for cooling the ZyWALL. Make sure they are not obstructed to allow maximum 
ventilation.

110

310

1100

Summary of Contents for ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Reviews:

No comments