manualshive.com logo in svg

ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 345 / 562

Share
Download
ZyXEL Communications ZyWALL 110 Series User Manual Download Page 345

ZyWALL 110/310/1100 Series User’s Guide

345

C

H A P T E R

      2 4

L2TP VPN

24.1  Overview

L2TP VPN uses the L2TP and IPSec client software included in remote users’ Android, iOS, or 
Windows operating systems for secure connections to the network behind the ZyWALL. The remote 
users do not need their own IPSec gateways or third-party VPN client software. 

Figure 226   

L2TP VPN Overview

24.1.1  What You Can Do in this Chapter

• Use  the  L2TP VPN screen (see 

Section 24.2 on page 347

) to configure the ZyWALL’s L2TP VPN 

settings. 

24.1.2  What You Need to Know

The Layer 2 Tunneling Protocol (L2TP) works at layer 2 (the data link layer) to tunnel network traffic 
between two peers over another network (like the Internet). In L2TP VPN, an IPSec VPN tunnel is 
established first and then an L2TP tunnel is built inside it. See 

Chapter 20 on page 281

 for 

information on IPSec VPN.

IPSec Configuration Required for L2TP VPN

You must configure an IPSec VPN connection for L2TP VPN to use (see 

Chapter 20 on page 281

 for 

details). The IPSec VPN connection must:

• Be enabled.
• Use transport mode.
• Not be a manual key VPN connection. 
• Use Pre-Shared Key authentication.
• Use a VPN gateway with the Secure Gateway set to 0.0.0.0 if you need to allow L2TP VPN 

clients to connect from more than one IP address.

Summary of Contents for ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Reviews:

No comments