ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 254 / 562

Chapter 18 Authentication Policy
ZyWALL 110/310/1100 Series User’s Guide
254
Multiple Endpoint Security Objects
You can set an authentication policy to use multiple endpoint security objects. This allows checking
of computers with different OSs or security settings. When a client attempts to log in, the ZyWALL
checks the client’s computer against the endpoint security objects one-by-one. The client’s
computer must match one of the authentication policy’s endpoint security objects in order to gain
access.
Forced User Authentication
Instead of making users for which user-aware policies have been configured go to the ZyWALL
Login screen manually, you can configure the ZyWALL to display the Login screen automatically
whenever it routes HTTP traffic for anyone who has not logged in yet.
Note: This works with HTTP traffic only. The ZyWALL does display the Login screen when
users attempt to send other kinds of traffic.
The ZyWALL does not automatically route the request that prompted the login, however, so users
have to make this request again.
Finding Out More
• See Section 18.3 on page 258 for an example of using an authentication policy for user-aware
access control.
18.2 Authentication Policy Screen
The Authentication Policy screen displays the authentication policies you have configured on the
ZyWALL.
Click Configuration > Auth. Policy to display the screen.