manualshive.com logo in svg

ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 25 / 562

Share
Download
ZyXEL Communications ZyWALL 110 Series User Manual Download Page 25

 Chapter 1 Introduction

ZyWALL 110/310/1100 Series User’s Guide

25

1.3.3  Navigation Panel

Use the navigation panel menu items to open status and configuration screens. Click the arrow in 
the middle of the right edge of the navigation panel to hide the panel or drag to resize it. The 
following sections introduce the ZyWALL’s navigation panel menus and their screens.

Figure 13   

Navigation Panel

Dashboard

The dashboard displays general device information, system status, system resource usage,, and 
interface status in widgets that you can re-arrange to suit your needs. See the Web Help for details 
on the dashboard.

Monitor Menu

The monitor menu screens display status and statistics information.

Table 6   

Monitor Menu Screens Summary 

FOLDER OR LINK

TAB

FUNCTION

System Status

Port Statistics

Displays packet statistics for each physical port. 

Interface 

Status

Displays general interface information and packet statistics.

Traffic 

Statistics

Collect and display traffic statistics.

Session 

Monitor

Displays the status of all current sessions.

DDNS Status

Displays the status of the ZyWALL’s DDNS domain names.

IP/MAC Binding

Lists the devices that have received an IP address from ZyWALL interfaces 
using IP/MAC binding.

Login Users

Lists the users currently logged into the ZyWALL.

Summary of Contents for ZyWALL 110 Series



















































































































































































































































































































































































































































































































































































Reviews:

No comments