ZyXEL Communications ZyWALL 110 Series, User Manual, Page: 123 / 562

Chapter 7 Interfaces
ZyWALL 110/310/1100 Series User’s Guide
123
Figure 78
Object References
The following table describes labels that can appear in this screen.
7.3.3 Add/Edit DHCPv6 Request/Release Options
When you configure an interface as a DHCPv6 server or client, you can additionally add DHCPv6
request or lease options which have the ZyWALL to add more information in the DHCPv6 packets.
To open the screen, click Configuration > Network > Interface > Ethernet > Edit, select
DHCPv6 Server or DHCPv6 Client in the DHCPv6 Setting section, and then click Add in the
DHCPv6 Request Options or DHCPv6 Lease Options table.
Figure 79
Configuration > Network > Interface > Ethernet > Edit > Add DHCPv6 Request/Lease
Options
Table 42
Object References
LABEL DESCRIPTION
Object Name This identifies the object for which the configuration settings that use it are displayed.
Click the object’s name to display the object’s configuration screen in the main window.
# This field is a sequential value, and it is not associated with any entry.
Service This is the type of setting that references the selected object. Click a service’s name to
display the service’s configuration screen in the main window.
Priority If it is applicable, this field lists the referencing configuration item’s position in its list,
otherwise N/A displays.
Name This field identifies the configuration item that references the object.
Description If the referencing configuration item has a description configured, it displays here.
Refresh Click this to update the information in this screen.
Cancel Click Cancel to close the screen.