ZyXEL Communications ZyWALL 10/10, User Manual

Page: 82 / 342

ZyWALL 10/10 II/50 Internet Security Gateway
7-2 Remote Node Setup
Figure 7-1 Menu 11.1 — Remote Node Profile for Ethernet Encapsulation
Table 7-1 Fields in Menu 11.1
FIELD DESCRIPTION EXAMPLE
Rem Node Name Enter a descriptive name for the remote node. This field can be
up to eight characters. LAoffice
Active Press [SPACE BAR] to select Yes (activate remote node) or No
(deactivate remote node).
Yes
Encapsulation Ethernet is the default encapsulation. Press [SPACE BAR] if you
wish to change to PPPoE encapsulation.
Ethernet
Service Type Press [SPACE BAR] to select from Standard , RR-Toshiba
(RoadRunner Toshiba authentication method) or RR-Manager
(RoadRunner Manager authentication method). Choose one of
the RoadRunner methods if your ISP is Time Warner's
RoadRunner; otherwise choose
Standard .
Standard
Service Name If you are using PPPoE encapsulation, then type the name of
your PPPoE service here. Only valid with PPPoE encapsulation.
poellc
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Encapsulation= Ethernet Edit IP= No
Service Type= Standard Session Options:
Service Name= N/A Edit Filter Sets= No
Outgoing:
My Login= N/A
My Password= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel: