Note: When the reset button is pressed all parameters will be reset back to
factory default including ESSID, password, IP address, WEP Keys.
The basic default configuration after reset is as follow.
1. IP address default: 192.168.1.2
2. Password default: 1234
3. ESSID default: Wireless
4. WEP:disabled
7. Why can't I configure B-100/B-101/B-200/B-220/B-300/B-400/G-100
client adapter with the supplied utility in Windows XP?
This is because XP uses it’s default configuration for wireless adapter. You can
disable it by entering Control Panel->Network and Dialup Connections-
>Wireless network connection->Advance and uncheck the use Windows to
configure wireless configuration check box and click OK. Now you need to
exit the supplied configuration utility in the Windows task bar and restart it
again. Now you can use the supplied utility to configure your B-100.
8. What is the default user name and password to login the ZyAIR G-5100
via the browser?
To restrict only the adminstrator can configure the router, there is a login
procedure prompted for asking User Name and Password. The default User
Name is 'admin' and the default password is the default SMT password,
'1234'.
9. How can I manage the ZyAIR G-5100 ?
■
Configuration via web browser to the embedded Web Configurator.
■
Telnet remote management
■
TFTP (Trivial File Transfer Protocol), FTP firmware upgrade and
configuration backup and restore.
10. What network interface does the ZyAIR G-5100 support?
