ZyXEL Communications ZyAIR G-405, User Manual, Page: 29 / 99

ZyAIR G-405 User’s Guide
The ZyAIR Wireless Navigator 3-5
Table 3-3 Navigator: Set IP
LABEL DESCRIPTION
Set IP Select this option to manually configure the Ethernet settings of the ZyAIR.
IP Enter an IP address in dotted decimal notation.
Mask Enter the subnet mask in dotted decimal notation.
Gateway Enter the IP address of the gateway device in dotted decimal notation.
Enable DHCP Select this option to set the ZyAIR to obtain Ethernet information (such as IP address and
subnet mask) from a DHCP server.
OK Click OK to save the settings.
Exit Click Exit to discard all changes and close this screen.
If you change the ZyAIR's IP address, you must use the new IP address if you
want to access the web configurator again.
3.7 Firmware Upgrade
Click Admin , FW Upgrade and refer to the related to the web configurator chapter for information.
3.8 About the ZyAIR Wireless Navigator
To view the version and copyright information, click Help , About to display the screen as shown.
Figure 3-5 Navigator: About
Click OK to close this screen.
3.9 Uninstalling the ZyAIR Wireless Navigator
Follow the steps below to uninstall the Navigator from your computer.
Step 1. Close and exit the Navigator.
Step 2. Click Start , ( all ) Programs , Wireless Navigator , Uninstall