manualshive.com logo in svg

ZyXEL Communications ZyAIR G-3000H, User Manual

Share
Download
ZyXEL Communications ZyAIR G-3000H User Manual Download Page 273

G-3000H User’s Guide

Appendix M Text File Based Auto Configuration

273

Appendix M

Text File Based Auto Configuration

This chapter describes how administrators can use text configuration files to configure the 
wireless LAN settings for multiple APs. 

Text File Based Auto Configuration Overview

You can use plain text configuration files to configure the wireless LAN settings on multiple 
APs. The AP can automatically get a configuration file from a TFTP server at startup or after 
renewing DHCP client information.

Figure 179   

Text File Based Auto Configuration

Use one of the following methods to give the AP the IP address of the TFTP server where you 
store the configuration files and the name of the configuration file that it should download.

You can have a different configuration file for each AP. You can also have multiple APs use 
the same configuration file. 

Note: 

If adjacent APs use the same configuration file, you want to leave out the 

channel setting since they could interfere with each other’s wireless traffic.

Summary of Contents for ZyAIR G-3000H












































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands