ZyXEL Communications ZyAIR G-3000H User Manual Download Page 129

Page: 129 / 299

G-3000H User’s Guide

Chapter 11 Certificates

129

11.10 Importing a Trusted CA’s Certificate

Click

CERTIFICATES

Trusted CAs

to open the

Trusted CAs

screen and then click

Import

to open the

Trusted CA Import

screen. Follow the instructions in this screen to save

a trusted certification authority’s certificate to the ZyAIR, see the following figure.

Note:

You must remove any spaces from the certificate’s filename before you can

import the certificate.

Figure 80

Trusted CA Import

The following table describes the labels in this screen.

Delete

Click

Delete

to delete an existing certificate. A window display asking you to

confirm that you want to delete the certificate. Note that subsequent certificates

move up by one when you take this action.

Refresh

Click this button to display the current validity status of the certificates.

Table 42

Trusted CAs (continued)

LABEL

DESCRIPTION

Table 43

Trusted CA Import

LABEL

DESCRIPTION

File Path

Type in the location of the file you want to upload in this field or click

Browse

to find it.

Browse Click

Browse

to find the certificate file you want to upload.

Apply

Click

Apply

to save the certificate on the ZyAIR.

Cancel

Click

Cancel

to quit and return to the

Trusted CAs

screen.

Summary of Contents for ZyAIR G-3000H












































































































































































































































































































Search results

Summary of Contents for ZyAIR G-3000H

Reviews:

Brands by name

Popular brands

ZyXEL Communications ZyAIR G-3000H, User Manual

Search results

Summary of Contents for ZyAIR G-3000H

Reviews:

Brands by name

Popular brands