ZyXEL Communications ZyAIR G-3000, User Manual

Page: 204 / 222

ZyAIR G-3000 User’s Guide
205 Appendix I Log Descriptions
Log Commands
Go to the command interpreter interface (the Command Interpreter Appendix explains how to access
and use the commands).
Configuring What You Want the ZyAIR to Log
Use the
sys logs load
command to load the log setting buffer that allows you to configure which logs
the ZyAIR is to record.
1
Redirect datagrams for the Host
2
Redirect datagrams for the Type of Service and Network
3
Redirect datagrams for the Type of Service and Host
8
Echo
0
Echo message
11
Time Exceeded
0
Time to live exceeded in transit
1
Fragment reassembly time exceeded
12
Parameter Problem
0
Pointer indicates the error
13
Timestamp
0
Timestamp request message
14
Timestamp Reply
0
Timestamp reply message
15
Information Request
0
Information request message
16
Information Reply
0
Information reply message
Table 83 Sys log
LOG MESSAGE DESCRIPTION
Mon dd hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"
This message is sent by the "RAS" when this syslog is generated. The
messages and notes are defined in this appendix’s other charts.
Table 82 ICMP Notes (continued)
TYPE CODE DESCRIPTION