ZyXEL Communications ZyAIR G-3000, User Manual

Page: 203 / 222

ZyAIR G-3000 User’s Guide
Appendix I Log Descriptions 204
Appendix I
Log Descriptions
This appendix provides descriptions of example log messages.
Table 81 System Maintenance Logs
LOG MESSAGE DESCRIPTION
Time calibration is
successful
The router has adjusted its time based on information from the time server.
Time calibration failed
The router failed to get information from the time server.
DHCP client gets %s
A DHCP client got a new IP address from the DHCP server.
DHCP client IP expired
A DHCP client's IP address has expired.
DHCP server assigns %s
The DHCP server assigned an IP address to a client.
SMT Login Successfully
Someone has logged on to the router's SMT interface.
SMT Login Fail
Someone has failed to log on to the router's SMT interface.
WEB Login Successfully
Someone has logged on to the router's web configurator interface.
WEB Login Fail
Someone has failed to log on to the router's web configurator interface.
TELNET Login Successfully
Someone has logged on to the router via telnet.
TELNET Login Fail
Someone has failed to log on to the router via telnet.
FTP Login Successfully
Someone has logged on to the router via FTP.
FTP Login Fail
Someone has failed to log on to the router via FTP.
Table 82 ICMP Notes
TYPE CODE DESCRIPTION
0
Echo Reply
0
Echo reply message
3
Destination Unreachable
0
Net unreachable
1
Host unreachable
2
Protocol unreachable
3
Port unreachable
4
A packet that needed fragmentation was dropped because it was set to Don't Fragment
(DF)
5
Source route failed
4
Source Quench
0
A gateway may discard internet datagrams if it does not have the buffer space needed
to queue the datagrams for output to the next network on the route to the destination
network.
5
Redirect
0
Redirect datagrams for the Network