ZyXEL Communications ZyAIR G-3000, User Manual

Page: 163 / 222

ZyAIR G-3000 User’s Guide
Chapter 19 System Maintenance and Information 164
C
H A P T E R
19
System Maintenance and
Information
This chapter leads you through SMT menus 24.8 and 24.10.
19.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from
Menu 24 –
System Maintenance . A list of valid commands can be found by typing
help
or
?
at the
command prompt. Type “exit” to return to the SMT main menu when finished.