ZyXEL Communications ZyAIR G-3000, User Manual

Page: 130 / 222

ZyAIR G-3000 User’s Guide
131 Chapter 13 LAN Setup
The following table describes the fields in this menu.
13.3.2 Configuring Bridge Link
Follow the steps below to configure bridge link on your ZyAIR.
1 From the main menu, enter 3 to open Menu 3 – LAN Setup .
2 Enter 5 to display Menu 3.5 – Wireless LAN Setup .
Figure 70 Menu 3.5 Wireless LAN Setup
3 In the Operating Mode field, press [SPACE BAR] to select Bridge / Repeater or AP
+ Bridge and press [ENTER].
Table 40 Menu 3.5.1 WLAN MAC Address Filter
FIELD DESCRIPTION
Active To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].
Filter Action Define the filter action for the list of MAC addresses in the MAC address filter table.
To deny access to the ZyAIR, press [SPACE BAR] to select
Deny Association and press
[ENTER]. MAC addresses not listed will be allowed to access the router.
The default action, Allowed Association , permits association with the ZyAIR. MAC
addresses not listed will be denied access to the router.
MAC Address Filter
1..32 Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are
allowed or denied access to the ZyAIR in these address fields.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to
save your configuration or press [ESC] to cancel and go back to the previous screen.
Menu 3.5 - Wireless LAN Setup
WLAN Adapter Index= WLAN 1
Operating Mode= Bridge / Repeater
ESSID= N/A
Hide ESSID= N/A Edit MAC Address Filter= N/A
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Edit Bridge Link Configuration= Yes
Frag. Threshold= 2432 Preamble= Long
WEP Encryption= Disable 802.11 Mode= Mixed
Default Key= N/A Max. Frame Burst= 650
Key1= N/A VLAN ID= 1
Key2= N/A Breathing LED= Yes
Key3= N/A
Key4= N/A
Authen. Method= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.