ZyAIR G-200 User’s Guide
4-2
Troubleshooting
Table 4-2 Troubleshooting Communication Problems
PROBLEM CORRECTIVE
ACTION
A.
Infrastructure
Make sure that the AP and the associated computers are turned on and
working properly.
Make sure the ZyAIR and the associated AP use the same SSID.
Change the AP and the associated wireless clients to use another radio
channel if interference is high.
Make sure that the computer and the AP share the same security option
and key. Verify the settings in the
Encryption
screen.
B.
Ad-Hoc (IBSS)
Verify that the peer computer(s) is turned on.
Make sure the ZyAIR and the peer computer(s) are using the same SS ID
and channel.
Make sure that the ZyAIR and the peer computer(s) share the same
security option and key.
Change the wireless clients to use another radio channel if interference is
high.
Make sure that the ZyAIR and the peer computer(s) share the same
security option and key. Verify the settings in the
Encryption
screen.
4.3 Problem with the Link Status
Table 4-3 Troubleshooting Link Quality
PROBLEM CORRECTIVE
ACTION
The link quality and/or signal
strength
is poor all the time.
Search and connect to another AP with a better link quality using the
Site
Survey
screen.
Move your computer closer to the AP or the peer computer(s) within the
transmission range.
There is too much radio interference (for example microwave or another
AP using the same channel) around your wireless network. Relocate or
reduce the radio interference.