ZyXEL X-550 User’s Guide
3.2.7 ADVANCED - WEB Filter
The
Web Filter
section is where you add the Web sites to be used for
Access Control
.
Figure 3-14 ADVANCED – Web Filter
ADD/EDIT WEB SITE
This is where you can add Web sites to the Allowed Web Site List or change entries in the Allowed Web
Site List. The Allowed Web Site List is used for systems that have the
Web Filter
option enabled in
Access Control
.
Enable:
Entries in the Allowed Web Site List can be activated or deactivated with this checkbox. New entries are
activated by default.
Web Site:
Enter the URL (address) of the Web Site that you want to allow; for example:
google.com
. Do not enter the
http://
preceding the URL. Enter the most inclusive domain; for example, enter
dlink.com
and access will
be permitted to both
www.dlink.com
and
support.dlink.com
.
Note:
Many web sites construct pages with images and content from other web sites. Access will be
forbidden if you do not enable all the web sites used to construct a page. For example, to access
my.yahoo.com
, you need to enable access to
yahoo.com
,
yimg.com
, and
doubleclick.net
.
Save:
Clicking
Save
saves the new or edited Allowed Web Site in the following list. When finished updating the
Allowed Web Site List, you must still click the
Save Settings
button at the top of the page to make the
changes effective and permanent.
ALLOWED WEB SITE LIST
The section lists the currently allowed web sites. An allowed web site can be changed by clicking the Edit
3-24
