ZyXEL X-550 User’s Guide
Destination IP Range:
The rule applies to a flow of messages whose WAN-side IP address falls within the range set here.
Destination Port Range:
The rule applies to a flow of messages whose WAN-side port number is within the range set here.
Save:
Clicking
Save
saves the new or edited StreamEngine™ Rule in the following list. When finished updating
the StreamEngine™ rules, you must still click the
Save Settings
button at the top of the page to make the
changes effective and permanent.
STREAMENGINE RULES LIST
The section shows the currently defined StreamEngine™ rules. A StreamEngine™ rule can be changed by
clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is
highlighted, and the "Edit StreamEngine™ Rule" section is activated for editing.
3.2.5 ADVANCED - Routing
Figure 3-12 ADVANCED - Routing
ADD ROUTE
Adds a new route to the IP routing table or edits an existing route.
Enable:
Specifies whether the entry will be enabled or disabled.
Destination IP:
The IP address of packets that will take this route.
Netmask:
One bits in the mask specify which bits of the IP address must match.
3-21
