ZyXEL Communications XS3800-28, User Manual, Page: 767 / 789

Appendix C IPv6
XS3800-28 User’s Guide
767
4
Click Close to exit the Local Area Connection Status screen.
5
Select Start > All Programs > Accessories > Command Prompt .
6
Use the
ipconfig
command to check your dynamic IPv6 address. This example shows a global address
(2001:b021:2d::1000) obtained from a DHCP server.
Example – Enabling IPv6 on Windows 10
Windows 10 supports IPv6 by default. DHCPv6 is enabled when you enable IPv6 on a Windows 10 PC.
To enable IPv6 in Windows 10:
1
Select Control Panel > Network and Sharing Center .
2
On the left side of the Network and Sharing Center , select Change adapter settings .
3
Right-click your network connection and select Properties .
C:\>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:b021:2d::1000
Link-local IPv6 Address . . . . . : fe80::25d8:dcab:c80a:5189%11
IPv4 Address. . . . . . . . . . . : 172.16.100.61
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : fe80::213:49ff:feaa:7125%11
172.16.100.254