ZyXEL Communications XS3800-28, User Manual, Page: 691 / 789

XS3800-28 User’s Guide
691
C
HAPTER
88
Networked AV Mode
88.1 Overview
Aside from the Web Configurator in Standard mode that has a complete set of configuration for
network installation, you can switch to Networked AV mode. Networked AV mode contains just the
necessary configurations for setting up and managing audio-video traffic on your network.
AV over IP is the transmission of audio-video data over an IP network.
Use a browser that supports HTML5, such Microsoft Edge, Mozilla Firefox, or Google Chrome. The
recommended minimum screen resolution is 1024 by 768 pixels.
The following sections introduces the configuration and functions of the Web Configurator In Networked
AV mode.
Click Networked AV at the top left of the Web Configurator to switch between the Web Configurator’s
Standard or Networked AV mode.
Figure 553 Web Configurator – Networked AV Mode Switch
88.2 Help
The Web Configurator’s online help has descriptions of individual Networked AV mode screens and
some supplementary information.
Click the Help link from a Web Configurator screen to scan the QR code or click the web link to display
the online help.
Figure 554 Open the Online Help
88.3 Summary
Use the SUMMARY screen to see the Switch’s front panel port status, connected ports information,
networked AV information, Nebula Cloud Control status, and a link to go to the IP Setup screen ( Section
88.11 on page 700 ).
The SUMMARY screen displays when you log into the Switch in Networked AV mode.