ZyXEL Communications XS3800-28, User Manual, Page: 69 / 789

Chapter 4 Web Configurator
XS3800-28 User’s Guide
69
4.4.2 Advanced Settings
In Advanced Settings , you can set up IP or DNS, set up your password, SNMP community, configure
Networked AV service to a VLAN, select and assign port role, link aggregation (trunking), and view
finished results.
In order to set up your IP or DNS, please do the following. Click Wizard > Advanced Settings > Step 1 IP to
access this screen.
Networked AV
VLAN IP
This field displays the Switch’s IP address for it to be managed over the AVoIP network.
IGMP Snooping This field displays Active when IGMP Snooping is enabled to forward group multicast traffic
only to ports that are members of that group.
Otherwise, it displays Inactive .
IGMP Snooping
Querier
This field displays Active when the Switch is allowed to send IGMP General Query messages
to the VLANs with the multicast hosts attached.
Otherwise, it displays Inactive .
Unknown
Multicast Frame
This field displays the action to perform when the Switch receives an unknown multicast
frame. It displays
Drop when the frames are discarded. It displays Flooding when the frames
are sent to all ports.
Transmitter/
Receiver
Connected Port
This field shows the Switch’s port numbers for connection to networked audio and video
equipment.
Inter-switch
Connected Port
This field shows the Switch’s port numbers for connection to another switch.
Previous Click Previous to show the previous screen.
Finish Review the information and click Finish to create the task.
Cancel Click Cancel to exit this screen without saving.
Table 13 Wizard > Basic Settings > Step 4 Summary (continued)
LABEL DESCRIPTION