ZyXEL Communications XS3800-28, User Manual, Page: 509 / 789

Chapter 67 OSPF
XS3800-28 User’s Guide
509
The following table describes the labels in this screen.
67.4.1 Add/Edit IPv4 OSPF Interfaces
Use this screen to add/edit an IPv4 OSPF interface. See Section 67.1 on page 501 for more information
on OSPF.
Click Add/Edit , or select an entry and click Add/Edit in the NETWORKING > OSPF > IPv4 OSPF > OSPF
Interface to display this screen.
Figure 404 NETWORKING > OSPF > IPv4 OSPF > OSPF Interface > Add/Edit
Table 269 NETWORKING > OSPF > IPv4 OSPF > OSPF Interface
LABEL DESCRIPTION
Index This field displays the index number for an interface.
Network This field displays the IP interface information.
Area ID This field displays the area ID (in an IP address format with dotted decimal notation) of an area
to associate the interface to that area.
Network Type This field displays the network type ( broadcast / point-to-point ) of this OSPF network.
Authentication This field displays the authentication method used ( Same-as-Area , None , Simple or MD5 ).
Key ID When the Authentication field displays MD5 , this field displays the identification number of the
key used.
Cost This field displays the interface cost used for calculating the routing table.
Priority This field displays the priority for this OSPF interface.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.